Extend the hose to the opening of the dump station, which is usually a hole in the ground that is slightly larger than the 3-inch hose. Remove the holding tank outlet cap and connect your 3-inch sewer hose to the outlet of your holding tank.As long as you’re careful, any splashing should be minimal. Consider wearing a pair of rubber gloves in case some effluent gets on your hands. Doing so will be met with rather unpleasant results. Don’t open any valves until the proper time.Leave the dump station area cleaner than you found it.Never put anything other than the contents of your holding tanks into the dump station.Pull away from the dump station and then add some water and chemicals to the holding tanks. If others are waiting to use the dump station, skip the tank flushing and hose rinsing steps.Wear protective rubber gloves and avoid touching the outside of the gloves.Never use your fresh water hose for rinsing sewer hoses or the dump station area.Store this in an area where it won’t come into contact with your drinking water hose. Carry an extra garden hose for rinsing in case the dump station doesn’t have one. Use a heavy-duty sewer hose about 6 to 8 feet long to make handling easier.This will cause liquids to drain-leaving solid waste behind to harden on the bottom of the tank. Don’t leave the black-water tank valve open when hooked up at a campsite. Don’t dump the black water tank until it is at least two-thirds full.When emptying both the black and gray tanks, dump the black water tank before the gray water tank so the “soapy water” from the gray tank can clean the residue from the hose.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |